Drone Detection & Airspace Security Blog | AirSight

AirGuard’s Proximity Intelligence: See Which Drones Are Really Closing In

Written by Monica Duarte | Nov 18, 2026, 11:01:00 AM

AirSight today announced that AirGuard, its drone detection software platform, now includes Proximity Intelligence. Based on how close each drone is getting to the site you are protecting, the new feature shows your team right away which drones are real threats.

Starting Monday, November 16, Proximity Intelligence will be on by default and will need no setup. Admins can choose whether it stays on for their account and which alert zones it uses.

Operators can see at a glance whether a drone that appears nearby is inside or outside one of your alert zones, whether it's approaching, loitering or heading away, how far off it is, and how soon it could arrive. Proximity Intelligence brings all of that together in a single Breach Status. Security teams can then instantly tell which drones need attention now and which can wait.

Until now, security teams had to determine from raw data whether a drone was actually a threat, and they had to do it under pressure while the drone and its pilot kept moving. Proximity Intelligence changes that. Operators can now see right away whether a drone is closing in on the site they’re protecting. The system handles the interpretation, so security operators can spend their time responding instead.

A Drone Over a New York Prison and Why Proximity Matters

In March, New York State corrections officials said a drone flew over Marcy Correctional Facility in upstate New York at around 1 a.m. and dropped a package between two dormitories. According to wtop news and the Associated Press, the package held two 8-inch double-edged knives, a cellphone, hair clippers, more than a pound of an unidentified green leafy substance wrapped in clear plastic, and sheets of paper soaked in intoxicating chemicals. Staff recovered it quickly, and the drone was later found outside the prison. When the story was reported, however, the person who flew it had not been identified.

Corrections Commissioner Daniel Martuscello called drone smuggling "an evolving but imminent threat" to the state prison system, which has seen about a dozen other drone incidents. Proximity Intelligence is built for moments like this one. When your team knows in seconds whether a drone is closing in on the perimeter or the yard, and how far the pilot is standing from your site, it gets a real head start on both the drone and the person behind it.

What Proximity Intelligence Delivers

Proximity Intelligence works on every Layer 1 or RF detection and appears in the Flight tab of the Details panel on AirGuard's Live tab. It measures distance and time relative to your own alert zones or, once the drone is inside all of them, relative to the detecting sensor. The feature also shows the drone's direction and marks how reliable each value is. Security operators see the following.

Zone status at a glance. A status line reads Inside [zone name], flagged as multiple zones when the drone is in more than one, or Outside of any zones. Operators do not have to guess where the drone sits relative to your site.

Direction and distance in one line. A banner shows “Approaching”, “Loitering near” or “Moving away from”, followed by the reference (an alert zone or the sensor), the distance to that reference and the time to reach it.

  • Approaching means the distance keeps decreasing.
  • Moving away from means the distance keeps increasing.
  • Loitering means the distance is holding steady, which can happen even while the drone is moving, for example when it is hovering, circling or fighting the wind.

The arrows show the trend:

  • ↓ down for approaching
  • ↑ up for moving away
  • A steady mark for loitering

Color that matches the threat. When the drone is inside an enabled alert zone, the banner is red, whatever direction it's flying. Outside every enabled zone, the banner turns amber as the drone approaches, gray as it loiters and green as it moves away.

One clear breach status. Everything above is combined into a single status:

  • Active: the drone is already inside one of your enabled alert zones.
  • Probable: the drone is outside your enabled alert zones but within 1.5 mi (2.4 km) of one, and it is consistently getting closer.
  • Not Imminent: the drone is more than 1.5 mi away, or it is not getting closer.

A reference that follows the drone. Distance and time are measured to the nearest enabled alert zone that the drone hasn't yet entered. When the drone crosses into that zone, the reference moves inward to the next zone. Once the drone is inside every enabled zone at the site, the reference switches to the detecting sensor, and the banner reads something like Approaching Sensor.

Focus on the drones that are close. A drone more than 1.5 miles or 10 minutes away shouldn't look as urgent as one heading straight for your fence. For that reason, any drone beyond 1.5 miles shows as > 1.5 mi (> 2.4 km in metric), and any drone more than 10 minutes out shows as > 10 min. Exact numbers appear only for drones close enough to matter, so your team's attention stays where it's needed.

Pilot intelligence. Every drone has a pilot, who is often nearby with a controller in hand. To help your ground team find the pilot, Proximity Intelligence shows three values:

  • Pilot to Sensor: the distance between the pilot and the detecting sensor, which tells you how close the pilot is to your facility.
  • Drone to Pilot: the distance between the drone and its pilot. This value is most useful when the drone is flying back after a drop.
  • Time to Pilot: approximately how long the drone will take to get back to the pilot. If the drone isn't heading toward the pilot, this value shows > 10 min. Data freshness you can see.

Know how current your data is.

    • If new sensor data stops arriving for a short time, values switch to estimated. They continue to update from the last known track and show a "~" prefix and an "(estimated)" label.
    • If the gap continues, values go stale: they freeze, dim and get a "(stale)" label, because the drone may have moved since then.
  • Missing data simply reads Not Available. Either way, no one mistakes a reading from a few seconds ago for a live one.

How Proximity Intelligence Works: Five Steps from Detection to Response

  1. Detect: AirGuard picks up the drone on the Live tab as an RF or Layer 1 detection.
  2. Measure: Proximity Intelligence works out the drone's distance and time to the nearest enabled alert zone it hasn't entered yet. Once the drone is inside all of them, it measures to the detecting sensor instead.
  3. Read: At a glance, the banner, its color and the Breach status tell the security operator whether the drone is inside a zone and whether it's closing in, with no mental math and no cross-referencing.
  4. Prioritize: Distant drones stay capped at > 1.5 mi or > 10 min, so attention goes straight to the drones that are actually getting closer.
  5. Act: Your ground team has the pilot's distance from your site and the drone's time back to the pilot in hand, so it knows where to head and how long it has to get there.

Designed With Security Operators in Mind

Security operators need to act fast when a drone shows up. That’s why Proximity Intelligence is turned on by default for every account and already covers all of your existing alert zones, with no setup required.

Admins are still in control. They can turn the feature off for the whole account under Settings → Layers → Use proximity intelligence, or exclude individual alert zones with the Enable proximity intelligence toggle in each zone's settings. An excluded zone keeps its boundary, alerts and notifications. Sub-users can see the per-zone switch but can't change it.

Proximity Intelligence helps security operators make faster decisions at correctional facilities, airports, stadiums, live events, corporate campuses, and critical infrastructure and utility sites. At these locations, a drone can mean anything from a contraband drop to a disrupted flight schedule, so operators need to know which drones are actually closing in.

“AirGuard's Proximity Intelligence shows your team right away which drones are real threats, so it can focus on the ones closing in. The result is faster responses and better-protected sites.” - Robert Tabbara, Founder & CEO, AirSight

With Proximity Intelligence, clear answers appear right where operators are already looking. Your team sees immediately which drones are real threats and can focus on the ones closing in. With that clarity, the team responds in a calm, controlled way instead of reacting under tension.

See AirGuard’s Proximity Intelligence in action and respond faster to drone threats.